Settings Menu - Renkforce 1275880 Notice D'emploi

All manuals and user guides at all-guides.com
e) Setting Menu
Various settings can be changed in the setting menu.
Proceed as follows:
• Briefly push the button „
lights up.
• Push the left function button (11) below the display „Menu" to call the setup
menu.
• Select the functions with the arrow buttons „
• Push the left function button (11) below the display „Select" to start setting
of the respective function.
• If no button is pushed for a few seconds, the mobile unit will automatically
return to standby mode.
Function „Volume" (set volume)
After calling the function, you can set the mobile unit's volume with the arrows „
Push the right function button (15) below the display „Back" to return to the main menu.
While the camera image is displayed, the volume can be adjusted directly with the arrows
„ / ".
Function „Brightness" (setting the brightness)
After calling the function, you can set the mobile unit's display brightness with the arrows „
Push the right function button (15) below the display „Back" to return to the main menu.
While the camera image is displayed, the brightness can be adjusted directly with the arrows
„ / ".
Function „Date & Time" (setting date and time)
After calling the function, you can use the arrows „
minutes, year, month and date.
The respective setting item flashes. Change the value with the arrows „
Push the right function button (15) below the display „Back" to return to the main menu.
Date and time must be set to be displayed in photographs.
The time is always displayed in 24h-mode.
When the rechargeable batteries are entirely flat (or when they are replaced), the settings will be
lost.
42
" (16), so that the display of the mobile unit
/ ".
/ " to switch between setting the hours,
/
/ ".
/ ".
".