Activating The Outdoor Unit From The Mobile Unit - Renkforce 1275880 Notice D'emploi

All manuals and user guides at all-guides.com
• Use the arrows „ /
• Use the arrows „ /
• Press the right function button (15) to save a photograph.
If you do not want to accept a call, briefly push the button „
out and the ringing melody ends prematurely.
Alternatively, the mobile unit will automatically return to standby after approx. 15 - 20 seconds if
you do not push any button. The camera image goes out and the ringing melody ends.
• While talking to the visitor, you can activate the door opener by briefly pushing the button „
The time for activation of the door opener in the basic setting is 5 seconds (adjustable between 1 and 25
seconds).
• To end the visitor's call, briefly push the button „
microphone are switched off.
The outdoor unit and the mobile unit are back in standby mode.
d) Activating the Outdoor Unit from the Mobile Unit
You can activate the camera in the outdoor unit manually from the mobile unit, e.g. if you want to see what
is happening in front of your door.
Proceed as follows:
• Briefly push the button „
light up.
• Push the right function button (15) below the display unit „Mon" (see figure
on the right); the camera image of the outdoor unit will appear.
• Press the right function button (15) to save a photograph.
• Push the button „ " (16) again briefly to terminate display of the camera
image.
The outdoor unit and mobile unit return to standby automatically af-
ter approx. 5 minutes.
" to adjust the volume of the speaker in the mobile unit.
" to adjust the desired display brightness.
" (16). The camera image goes out, the speaker and
" (16), so that the display of the mobile unit will
" (16). The camera image goes
" (17).
41