Jenn-Air JGR8895BDS Instructions Pour L'installation page 16

9. Turn the Number .047 LP gas orifice hood counterclockwise
to remove.
A. Number .047 LP gas orifice hood
10. Install the Number .0723 Natural gas orifice hood, turning it
clockwise 4 or 5 turns. Do not overtighten.
A. Number .0723 Natural gas orifice hood
11. Position the oven bake burner over the orifice hood and
reinstall using 2 screws.
A. Bake burner orifice hood
B. Oven bake burner
C. Oven bake burner screws
To Convert Upper Oven Bake Burner
12. Repeat steps 1through 8 above for conversion of the upper
oven bake burner.
13. Remove the Number .038 LP gas orifice spud in the upper
oven and replace with a Number .0585 Natural gas orifice
spud.
14. Reverse steps to reinstall the orifice covers, oven bake
burners, oven baffles and oven bake covers in both ovens.
16
All manuals and user guides at all-guides.com
A
A
.0723
B
A
C
To Convert Oven Broil Burner
1. Remove broil burner screw and set aside.
2. Remove the broil burner from the broil burner orifice hood.
The broil burner will hang in the back of the oven while
changing the orifice hood.
B
A. Broil burner screw
B. Broil burner orifice hood
3. Turn the green Number .38 LP gas broil burner orifice hood
counterclockwise to remove.
A. Number .38 LP gas broil burner orifice hood
4. Install the Number 1.42 Natural gas broil burner orifice hood,
turning it clockwise 4 or 5 turns. Do not overtighten.
A. Number 1.42 Natural gas broil burner orifice hood
5. Place the broil burner on the broil burner orifice hood. Insert
the broil burner locator pin in the hole in the oven back.
A
A
A
1.42