Jenn-Air JGR8895BDS Instructions Pour L'installation page 15

2. Unscrew the hex-shaped regulator cap from the regulator
and remove the regulator pin.
A. Regulator pin
B. Regulator cap
3. Flip the regulator pin over and snap pin firmly into place.
A
A. LP gas position
B. Natural gas position
4. Screw the hex-shaped regulator cap securely back into
place. Do not overtighten.
To Convert Oven Bake Burners
To Convert Lower Oven Bake Burner:
1. Remove oven racks from inside the oven cavity.
2. Remove oven door. See "Oven Door" section in the Use and
Care Guide for oven door removal instructions.
3. Using a Phillips screwdriver, remove and set aside the 2 oven
bake burner cover screws located at the front of the oven.
B
A. Bake burner cover
B. Bake burner cover screws
All manuals and user guides at all-guides.com
A
B
B
A
4. Lift up and remove oven bake burner cover.
5. Unscrew 2 wing nuts and remove oven baffle.
A
A. Oven baffle
B. Wing nuts
6. Remove the 2 oven bake burner screws and set aside.
7. Gently set the bake burner to the side.
A. Igniter and wires
B. Bake burner screws
8. Unscrew and remove the cover over the orifice.
A. Orifice cover
B
A
B
A
15