Cleaning And Care; Troubleshooting - DS Produkte Z 00903 Mode D'emploi

Cleaning and Care

CAUTION!
■ Never immerse the device, mains cable or plug in water or other liquids.
■ Before cleaning the device, always remove the plug from the mains socket and allow
the device to cool down.
■ Do not use any corrosive or abrasive cleaning agents. They could damage the sur-
face.
■ Do not use any metal objects to remove burnt bread residues from the device.
■ The crumb tray is not suitable for dishwasher use.
■ Do not spray cleaning agents directly onto the toaster.
• Wipe the outside of the device with a clean and slightly damp cloth.
• Regularly empty the crumb tray:

Troubleshooting

If the device is not working properly, please check whether you are able to rectify the
problem yourself fi rst.
Do not attempt to repair a defective device yourself!
Problem Possible cause/solution
• Is the mains plug correctly inserted into the socket?
The device
cannot be • Is the plug socket defective? Try another plug socket.
switched on.
• Check the fuse of your mains connection.
The toast is
• Set a low degree of toasting using the rotary knob.
too brown.
• Pull out the mains plug and allow the toaster to cool down. Move
The toast gets
the lowering lever up and down a few times to release bread which
stuck in the
is stuck.
device.
• The bread slices may be too thick. Use thinner slices of bread.
All manuals and user guides at all-guides.com
17
1. Remove the crumb tray carefully.
2. Remove the crumbs. Wipe off the tray with a damp cloth
or rinse it with a mild detergent under running water.
3. Dry the tray thoroughly.
4. Reinsert the crumb tray.
EN