Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4.
Enter your wireless network or wireless router's
name.
~ Enter numbers directly using the number
buttons on your remote control.
~ Enter letters by selecting a letter with the
▲▼◄► buttons, and then pressing the v
button.
~ To display capital letters (or redisplay lower
case letters if capital letters are displayed),
select
, and then press the v button.
~ To display symbols and punctuation, select
123#&, and then press the v button. To
redisplay letters, select 123#&, and then press
the v button.
When finished, select Done, and then press the
v button.
5.
On the Security method screen that appears,
use the ▲▼ buttons to select the network's
Security method, and then press the v button.
On the next screen, enter your network's
security code or pass phrase.
~ Enter numbers directly using the number
buttons on your remote control.
~ Enter letters by selecting a letter with the
▲▼◄► buttons, and then pressing the v
button.
When finished, select Done, and then press
the v button. The product searches for the
network.
6.
The Network connection fail screen appears. Use
◄► buttons to select IP Settings, and then
press the v button.
7.
Select the IP Setting field, and then set it to
Enter manually.
8.
Select a network parameter to enter (IP
Address, for example), and then press v
button. Use the number keypad on your remote
control to enter the numbers for the parameter.
You can also enter numbers using the ▲▼
buttons. Use the ◄► buttons on the remote
control to move from entry field to entry field
within a parameter. When done with one value,
press the v button.
9.
Press the ▲ or ▼ button to move to another
parameter, and then enter the numbers for that
parameter following the instructions in Step 8.
10. Repeat Steps 8 and 9 until you have filled in all
parameters.
✎
You can get the Network parameter values from
your Internet provider.
11. When finished, select Return ( ' ), and then
press the v button. The Security Key screen
appears.
12. On the Security Key screen, enter your
network's Security Code or Pass Phrase. Enter
numbers directly using the number buttons on
your remote control. Enter letters by selecting
a letter with the ▲▼◄► buttons, and then
pressing the v button.
13. When finished, select Done at the right of the
screen, and then press the v button. The
product verifies the network connection and
then connects to the network.
14. After the home theater verifies the network,
select OK, and then press the v button.
✎
You can also begin the Manual Network setup by
going to Settings > Network > Network Status.
WPS(PBC)
❏ ❏
One of the easiest ways to set up the wireless
network connection is using the WPS(PBC) function.
If your wireless router has a WPS(PBC) button, follow
these steps:
Follow the Steps 1 to 3 in "Configuring Your Network
Connection". (See page 21)
1.
In the Network Settings screen, change
Network Type to Wireless. The product
searches for and then displays a list of the
available networks.
2.
Scroll the list down, select WPS(PBC), and then
press the v button.
3.
Press the WPS(PBC) button on your router
within two minutes. Your product automatically
acquires all the network settings values it needs
and connects to your network after the network
connection is verified.
4.
When it is done, highlight OK, and then press the
v button.
✎
For a WPS connection, set your wireless router's
security encryption to AES. WEP security
encryption does not support a WPS connection.
23
- English
Publicité
Table des Matières
