34
Setting and starting a washing
programme with delay start
1. Press the on/off button.
2. Set a washing programme.
3. Press the delay start button until the dig-
ital display shows the necessary delay
start of the washing programme.
4. Close the door.
– The countdown of the delay start
starts.
– When the countdown is completed,
the washing programme starts auto-
matically.
Do not open the door during the count-
down to prevent interruption of the
countdown. When you close the door
again, the countdown continues from
the point of interruption.
Cancelling a delay start
1. Press and hold function buttons B and C
until the digital display shows two hori-
zontal bars.
– When you cancel a delay start, you also
cancel the washing programme.
2. Set a new washing programme.
End of the washing programme
Switch off the appliance in these conditions:
• The appliance stops automatically.
• The audible signal for the end of the pro-
gramme operates.
1. Open the door.
– The digital display shows 0.
Washing programmes
Washing programmes
Programme
Degree of soil
1
Any
1)
auto 45-70°
2
Heavy soil
intensive 70°
3
Normal or light
2)
soil
30 minutes 60°
All manuals and user guides at all-guides.com
2. Press the on/off button.
3. For better drying results, keep the door
Let the dishes cool down before you remove
them from the appliance. Hot dishes are
easily damaged.
Standby mode
If you do not switch off the appliance at the
end of the washing programme, the appli-
ance automatically goes into standby mode.
The standby mode decreases energy con-
sumption.
Three minutes after the end of the pro-
gramme, all indicator lights go off and the
digital display shows one horizontal bar. The
optical signal goes off.
Press one of the buttons (not the on/off but-
ton), to go back to end-of-programme mode.
Removing the load
• First remove items from the lower basket,
• There can be water on the sides and door
Type of load
Crockery, cutlery, pots
and pans
Crockery, cutlery, pots
and pans
Crockery and cutlery
– The end-of-programme indicator light
comes on.
ajar for some minutes before you remove
the dishes.
If the save energy function is set, dishes
can be wet once the programme finish-
ed. We recommend to leave the appli-
ance door ajar so that dishes can dry
naturally.
then from the upper basket.
of the appliance. Stainless steel becomes
cool more quickly than the dishes.
Programme description
Prewash
Main wash up to 45°C or 70°C
1 or 2 intermediate rinses
Final rinse
Drying
Prewash
Main wash up to 70°C
1 intermediate rinse
Final rinse
Drying
Main wash up to 60°C
Final rinse