Maintenance And Cleaning - TurMix AX 500 Mode D'emploi

54 54
4.9. Maintenance and cleaning
5
6
Turmix-AX 500-04.indd 55
!
Clean housing
Clean housing with a soft cloth. Do not use chemicals, harmful additives, fuel,
!
or harsh cleaners, as the housing could be damaged.
Clean area
Due to the operating method, dust will collect in the area surrounding the air
i
cleaner. We recommend cleaning the area weekly with a damp cloth.
Install or remove filter
Remove filter from packaging prior to first use. Place the unit on the backside
for this.
Push the two fastener clips together to release the filter bracket and pull out
from the unit bottom 5.
Replace filter bracket as follows: Place filter bracket so both clips face away
from the unit. The bar on the filter bracket must be to the right of the handle.
Push filter into unit until a locking sound is heard.
Bar/Marking
HEPA filter
The HEPA filter 6 consists of three layers: a folded HEPA filter between two
charcoal filters. The filters are affixed inside a cartridge.
The HEPA filter is a single use filter and can not be washed. Replace after
about 6-8 months (contact dealer to purchase, or see page 61).
Unplug unit before maintaining or cleaning!
55
DE DE
FR
IT
GB
22.1.2007 16:42:28 Uhr