Brief Instructions - TurMix AX 500 Mode D'emploi

1.2 Brief instructions

1. 1.
.
5.
7.
9.
Turmix-AX 500-04.indd 48
.
4.
6.
8.
1. Remove filter from protective
bag and install prior to initial
operation (see pages 51
and 55)
2. Place equipment on a steady
surface. Read and follow set-up
instructions on page 51
3. Plug into outlet
4. Set Clock: Hold TIMER button
until unit beeps, use SPEED or
IONIZER button to set hour. Wait
briefly until minute display
begins to blink, then adjust with
SPEED or IONIZER button. Wait
for display to stop blinking
5. Switch unit into Standby mode
by pressing the POWER button
6. Repeatedly press SPEED button
to adjust fan setting (high,
medium, low)
7. Press IONIZER button to turn on
ionization
8. Repeatedly press TIMER button
to set automatic shut-off
9. Regularly clean filter and unit
(see page 55)
22.1.2007 16:42:19 Uhr
48 48