Philips HD3198 Mode D'emploi page 6

Only connect the multicooker
•
to a grounded power outlet.
Always make sure that the
plug is inserted firmly into the
power outlet.
Do not use the appliance if the
•
plug, the power cord, the inner
pot, the sealing ring, or the
main body is damaged.
Do not let the power cord
•
hang over the edge of the
table or worktop on which the
multicooker stands.
Make sure the heating element,
•
the temperature sensor, and
the outside of the inner pot are
clean and dry before you put
the plug in the power outlet.
Do not plug in the multicooker
•
or press any of the buttons
on the control panel with wet
hands.
Make sure to avoid spillage on
•
the power connector to avoid
a potential hazard.
Always follow the instructions
•
and use the appliance properly
to avoid potential injury.
Do not put too much cooking
•
oil in the inner pot to deep fry
ingredients.
EN
4
All manuals and user guides at all-guides.com
Caution
•
•
•
•
•
•
•
•
Never use any accessories or
parts from other manufacturers
or that Philips does not
specifically recommend. If you
use such accessories or parts,
your guarantee becomes
invalid.
Do not expose the multicooker
to high temperatures, nor place
it on a working or still hot
stove or cooker.
Do not expose the multicooker
to direct sunlight.
Place the multicooker on a
stable, horizontal, and level
surface.
Always put the inner pot in the
multicooker before you put the
plug in the power outlet and
switch it on.
Do not place the inner pot
directly over an open fire to
cook dishes.
Do not use the inner pot if it is
deformed.
The accessible surfaces
may become hot when the
multicooker is operating. Take
extra caution when touching
the multicooker.