Baking (Four); Roasting (Rissoler); Frying (Frire) - Philips HD3198 Mode D'emploi

10
Press the start butto n (On/Off) to
confirm and start cooking (fig. i).
11
When the cooking is finished, the appliance
beeps and turns into warm keeping
automatically.
Baking (Four)
1
Put the food and ingredients to bake in the
inner pot.
2
Wipe the outside of the inner pot dry
(fig. d), and then put it in the multicooker
(fig. e).
3
Close the lid of the multicooker (fig. f),
and put the plug in the power socket
(fig. g).
Note
• When baking cake or bread, keep the lid closed
during cooking. Baking cake at 130°C and by 45
minutes usually delivers best cooking result.
• If you bake other food with a temperature
above 140°C, keep the lid open.
4
Press the menu button (Menu) to select
bake (Four) (fig. q).
» To choose a different baking temperature,
press the temperature button (Temp)
once or repeatedly to select the
temperature you need. (fig. r)
» To choose a different cooking time, refer
to chapter "Setting up the cooking time".
5
Press the start button (On/Off) to confirm
and start cooking (fig. i).
6
When the cooking is finished, the appliance
beeps and turns into warm keeping
automatically.
All manuals and user guides at all-guides.com
Roasting (Rissoler)
1
2
3
4
5
6
7
8
Frying (Frire)
1
2
3
Note
• If the baking temperature is set below 80°C,
when the cooking is finished, the appliance turns
into standby automatically.
• When removing the inner pot from the
multicooker after cooking, use a kitchen glove or
a cloth, as the inner pot could be very hot.
Put food and ingredients into the inner pot.
Wipe the outside of the inner pot dry
(fig. d), and then put it in the multicooker
(fig. e).
Close the lid of the multicooker (fig. f),
and put the plug in the power socket
(fig. g).
Press the menu button (Menu) to select
roast (Rissoler) (fig. s).
Press the start button (On/Off) to confirm
and start cooking (fig. i).
There are 2 stages of roasting. When the
first stage (about 35 minutes) is over, the
multicooker beeps as a reminder for you
to open the lid, and turn the food over in
the inner pot.
Press the menu button (Menu) to start the
second stage.
» If the menu button (Menu) is not
pressed after the first stage is over, the
multicooker will turn into warm keeping
until the cooking time is over.
When the cooking is finished, the appliance
beeps and turns into standby automatically.
Put food and ingredients into the inner pot.
Wipe the outside of the inner pot dry
(fig. d), and then put it in the multicooker
(fig. e).
Put the plug in the power socket (fig. g).
EN
11