General Cleaning And Tightening; Storage - Maruyama M LINE MT23L Manuel Du Propriétaire/De L'utilisateur

General Cleaning and Tightening

WARNING
POTENTIAL HAZARD
• When engine is running, cutting head is
rotating/moving and other parts are
moving.
WHAT CAN HAPPEN
• Contact with rotating/moving Tool or
other moving parts could cause serious
personal injury or death.
HOW TO AVOID THE HAZARD
• Always turn off your Trimmer before
you clean or perform any maintenance
on it.
The MARUYAMA Trimmer will provide maximum
performance for many, many hours if it is maintained
properly. Good maintenance includes regular checking
of all fasteners for correct tightness, and cleaning the
entire machine.

Storage

For long term storage of the Trimmer:
1. Empty the fuel tank into a suitable fuel storage
container.
2. Pump the primer bulb on the carburetor until all
fuel is discharged through the clear fuel return
hose.
3. Run the engine to remove any fuel that may
remain in the carburetor.
4. Perform all regular maintenance procedures and
any needed repairs.
5. Remove the spark plug and squirt a very small
amount of oil into the cylinder.
6. Pull the starter grip once.
All manuals and user guides at all-guides.com
7.
8.
9.
— US-21 —
CAUTION
POTENTIAL HAZARD
• Oil may squirt out of the spark plug
opening when you pull the starter grip.
WHAT CAN HAPPEN
• Oil can cause eye injuries.
HOW TO AVOID THE HAZARD
• Protect your eyes and keep your face
away from the spark plug opening.
Slowly pull the starter grip to bring the piston to
the top of the cylinder (TDC).
Reinstall the spark plug.
Store the Trimmer in a dry place away from
excessive heat, sparks or open flame.