General Cleaning And Tightening; Storage - Maruyama BT23L Manuel Du Propriétaire/De L'utilisateur

Plug Hole
Gearcase

General Cleaning and Tightening

The Trimmer will provide maximum performance for
many, many hours if it is maintained properly.
WARNING
POTENTIAL HAZARD
• When engine is running, Attached Tool is
rotating/ moving and other parts are moving.
WHAT CAN HAPPEN
• Contact with rotating/moving Tool or other
moving parts could cause serious personal
injury or death.
HOW TO AVOID THE HAZARD
• Always turn off your Trimmer before you
clean or perform any maintenance on it.
Good maintenance includes regular checking of all
fasteners for correct tightness and cleaning the entire
machine.

Storage

For long term storage of the Trimmer:
1. Empty the fuel tank into a suitable fuel storage
container.
2. Pump the primer bulb on the carburetor until all
fuel is discharged through the clear fuel return
hose.
3. Run the engine to remove any fuel that may
remain in the carburetor.
Bearing Lube
(P/N 211337)
Grease Plug
Attaching Shaft
Boss Adapter
4. Perform all regular maintenance procedures and
any needed repairs.
5. Remove the spark plug and squirt a very small
amount of oil into the cylinder.
POTENTIAL HAZARD
• Oil may squirt out of the spark plug opening
when you pull the starter grip.
WHAT CAN HAPPEN
• Oil can cause eye injuries.
HOW TO AVOID THE HAZARD
• Protect your eyes and keep your face away
from the spark plug opening.
6. Pull the starter grip once.
7. Slowly pull the starter grip to bring the piston to
the top of the cylinder (TDC).
8. Reinstall the spark plug.
9. Store the Trimmer in a dry place away from
excessive heat, sparks or open flame.
− US-19 −
CAUTIONN