Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
TH125_ITF 24081800 01_07
INDICATIONS AND CONTROLS
(see fig. 1)
1
Sensor push button for cover
closing.
2 R
Reset.
3
Button
P
programmed temperature and
temperature threshold.
4
Push button for clock setting
and for on-off time delays.
5
Button for selecting the cooling
(
) or heating program (
6
Digital clock.
7
Battery charge status.
8 OFF
Stand-by mode indicator.
9
Display of on-off time delays.
10
MANUAL mode indicator.
All manuals and user guides at all-guides.com
15-01-2007
11
12
13
14
for
viewing
the
15
).
16
17
18
16:23
Pagina 5
Cooling program indicator.
Heating program indicator.
Digital thermometer.
Button for selecting MANUAL
or AUTOMATIC thermostat
mode.
Knob for manual temperature
adjustment.
When the knob is turned, the
temperature field of the
display shows the set tempe-
rature for 4 s.
When this warning appears, it
means the batteries are low
.
Button for disabling ther-
mostat control, either with or
without anti-freeze protection.
Push button for activation
TIMED MANUAL PROGRAM
or STAND-BY MODE.
19
Increase (temperature, day,
time, etc.).
20
Decrease (temperature, day,
time, etc.).
21 6÷24°C
Temperature range for heating
(
) program in MANUAL
operation.
22 18÷31°C Temperature range for cooling
(
) program in MANUAL
operation. A position which
exceeds 31 °C (O) places the
system in OFF status.
23
Cursors
for
setting in AUTOMATIC mode
0÷23
for each hour of the day.
When the cursor is moved, in
the hours field the hour that
corresponds to the cursor is
displayed,
temperature field shows the
set temperature for 4 s.
24 6÷24°C
Temperature range for heating
program (
).
temperature
while
the
5
Publicité
Chapitres
Table des Matières
