11 -Stand-By Mode In Cooling Program; 12 -Timer-Controlled Plant Stand-By Intervals - Bpt TH 125 Mode D'emploi

TH125_ITF 24081800 01_07
OFF
OFF
freeze temperature, which can be changed
with the or button (fig. 35).
Any temperature can be chosen between 2
°C and 35 °C, and it will be maintained until
further adjustments are made or until a dif-
ferent operating mode is selected. The
default setting is 6 °C.
After about 5 s from the last operation, the
room temperature appears.
Without anti-freeze protection
10.2 - Press the button
The message OFF confirms that THERMO-
PROGRAM control of the system is bypas-
sed.
For 5 s, the room temperature reading
disappears, replaced by
10.3 - To restore AUTOMATIC operating
mode, press button
14
All manuals and user guides at all-guides.com
15-01-2007
20
26
18
24 OFF OFF
15 22
28
22
6 24
18
Fig. 35
11 - STAND-BY MODE IN COOLING
PROGRAM
11.1 - Press the button
The message OFF confirms that THERMO-
PROGRAM control of the system is bypas-
sed. For 5 s, the room temperature reading
disappears, replaced by
11.2 - To restore AUTOMATIC operating
mode, press button
12 - TIMER-CONTROLLED PLANT
twice (fig. 36).
STAND-BY INTERVALS
To bypass the system (either with or without
the anti-freeze protection) for a few hours or
a few days, proceed as follows:
. Programming in hours
12.1 - Ensure that the thermostat is set to
system bypass (with or without anti-freeze).
.
16:23 Pagina 14
20
26
18
24
22
15
22 28
6 24
18
Fig. 36
once (fig. 37).
.
.
18
OFF OFF 24
15
22
6
18
18
24
OFF OFF
15
22
6
18
12.2 - Press the button once (fig. 38).
The message h01 comes up on the display
in place of the current time.
For 5 s, the room temperature reading
disappears, replaced by
freeze temperature.
12.3 - Press the button or
desired number of hours is reached, from 1
to 99 (fig. 39).
20
26
22
28
24
Fig. 37
20
26
22
28
24
Fig. 38
or the anti-
until the