16 -Replacing The Batteries - Bpt TH 125 Mode D'emploi

TH125_ITF 24081800 01_07
conclusion THERMOPROGRAM will go back
to the status it was in prior to activation.
To delete remote control of the fixed-time
manual program, press the button
The default setting for the fixed-time manual
programme is 1 hour at 20 °C.
Note. When the program is activated remo-
tely, the remaining time in the hour or day is
counted as a full hour or day.
All manuals and user guides at all-guides.com
15-01-2007
20
26
18
24
15 22
22 28
6 24
18
Fig. 48
20
26
18
24
15 22
28
22
6 24
18
Fig. 49
Fixed-time manual programming by remo-
te control
15.1 - Ensure you are in MANUAL operating
. mode.
15.2 - Set the desired temperature using
knob
15.3 - Press button
hours (fig. 48), twice to set the days (fig.
49).
16:23 Pagina 17
20
26
18
24
15 22
28
22
6 24
18
Fig. 50
20
26
18
24
22
15
22 28
6 24
18
Fig. 51
(fig. 47).
once to set the
On the display, instead of the current time,
the message h01 will appear if you are set-
ting the hours, or d01 if you are setting the
days.
15.4 - Press button or
reach the desired hours (fig. 50) or days (fig.
51) from 1 to 99.
15.5 - To save the set programme as a pro-
gramme which can be remotely activated,
press the button .
16 - REPLACING THE BATTERIES
When the indicator flashes on the
display, it means you have about 1 month to
replace the batteries (fig. 52).
When the indication plus the
symbol appear on the display, the unit is no
longer operative and has set the heating and
air-conditioning system to OFF (fig. 53).
20
26
18
24
22
15
22 28
6 24
18
Fig. 52
until you
17