VOLTCRAFT QCP-3000 Mode D'emploi page 3

Operating Instructions
USB charger "QCP-3000"
Item No. 2388658
Intended Use
The USB charger has a USB volt age/power outlet which is suitable for charging a compatible
device (e.g., smartphone or tablet, etc.).
As a special feature, the product offers support for the charging standard "Qualcomm
Charge 3.0" (compatible with "Quick Charge 2.0" and "Quick Charge 1.0"). By automatically
detecting the connected device, the USB charger provides the compatible output voltage or
output current. As a result, the charging process for compatible devices can be significantly
accelerated.
The product is operated with the power from the mains.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can result in short circuits, fires, electric shocks or other hazards. Read
the instructions carefully and store them in a safe place. Make this product available to third
parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery Content
• USB charger
• Operating instructions
Up-to-date Operating Instructions
Download the latest operating instructions at www.conrad.com/downloads or scan the QR code
shown. Follow the instructions on the website.
Explanation of Symbols
The symbol with the lightning in the triangle is used if there is a risk to your health,
e.g. due to an electric shock.
The symbol with the exclamation mark in the triangle is used to indicate important
information in these operating instructions. Always read this information carefully.
The arrow symbol indicates special information and advice on operation.
Safety Instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
a) General Information
• The device is not a toy. Keep it out of the reach of children and pets.
Devices operated on mains voltage should not be used by children. Therefore, be
especially careful when children are around.
Use the product where it is out of the reach of children.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• The product is intended for use in dry indoor rooms only; it must not get damp
or wet; never touch it with damp wet hands! There is a risk of a life-threatening
electric shock!
• Protect the appliance from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, steam and solvents. Protect it against dust
and dirt.
• Never use the product immediately after moving it from a cold room into a warm
one. The condensation that forms might destroy the product. Furthermore, this
could cause a lethal electric shock!
Allow the product to reach room temperature before connecting it to the power
supply and putting it into use. In some cases, this may take several hours.
• Do cover the product when you use it. Ensure sufficient ventilation.
• Do not short circuit the USB outlet.
• For safety reasons, always unplug the USB charger from the mains socket during
a lightning storm.
• Never leave the product and the connected device unattended during the charging
process.
• Avoid the following adverse conditions at the location of installation and during
transport:
- Dust or flammable gases, fumes or solvents
- Strong vibrations, impacts or blows
- Strong magnetic fields such as those found close to machinery or loudspeakers
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
Quick - has been subjected to any serious transport-related stresses.
®
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Take care that the connected cable (for e.g., to your smartphone) is not kinked or
squeezed and that no one can trip on it.
• Disconnect the product from the power supply if the product will not be used for a
while (e.g., storage), unplug the USB charger from the mains socket.
• On industrial sites, the accident prevention regulations of the association of the
industrial workers' society for electrical equipment and utilities must be followed.
• Consult an expert when in doubt about the operation, safety or connection of the
appliance.
• Maintenance, modifications and repairs must only be completed by a technician
or an authorised repair centre.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
b) Supply Voltage
• The design of the USB charger complies with the safety class II. Use only a proper
mains socket as the power source for the USB charger.
• The mains socket into which the USB charger is plugged must be easily accessible.
• Do not pull the USB charger from the mains socket by pulling on the cable.
• Never touch a USB charger that shows signs of damage, as this could cause a
fatal electric shock!
First, switch off the mains voltage to the socket to which the product is connected
(switch off at the corresponding circuit breaker or remove the safety fuse or
switch off at the corresponding RCD protective switch, so that the socket is fully
disconnected).
You can then unplug the USB charger from the mains socket. Dispose of the
damaged USB charger in an environmentally friendly way; do not use it any more.
c) Connected Devices
• Also observe the safety and operating instructions of any other devices which are
connected to the product.