Philips HF8431 Mode D'emploi page 11

It takes about 4 hours to fully charge the massager. A
full charge gives you and your partner up to 5 hours
to explore each other.
The actual operating time may vary over time,
depending on the selected vibration mode and
speed level.
Charge the massager when the light ring
starts flashing slowly to indicate that the battery is
almost empty.
1 Make sure that all parts (massager and charger)
are dry.
2 Insert the small plug into the charger and put
the adapter in the wall outlet.
3 Place the massager on the charger. It only
fits properly on the charger with the buttons
facing up.
The massager switches off automatically when you
place it on the charger.
, The massager slowly vibrates for a few seconds
to get into the correct position for optimal
charging.
Note: Make sure the pre-warming function is switched
off when you charge the appliance (see chapter
'Preparing for use').
Note: The charger does not work when the massager is
placed incorrectly on the charger.
, During charging the light ring flashes.
Note: When you charge the massager for the first
time or after a long period of non-use, it may take a
few minutes before the light ring starts flashing. This is
normal
Note: The appliance may produce a smell the first few
times you charge it. This is normal.
EnglisH
11