Philips HF8431 Mode D'emploi page 12

EnglisH
12
, When the battery is fully charged, the
light ring goes out.
Preparing for use
Thoroughly clean the massager before first use,
after every use and when you use it on another
body area, to reduce the risk of infection (see
chapter 'Cleaning').
Pre-warming the massager
The charger has a pre-warming button that you can
use to pre-warm the bottom of the massager to a
comfortable temperature (approx. 104°F/40°C).
Never warm the massager in an oven or
microwave.
1 Place the massager on the charger. It only
fits properly on the charger with the buttons
facing up.
2 Press the pre-warming button.
, The pre-warming light ring starts flashing to
indicate that the massager is warming up.
, After approx. 5 minutes, the pre-warming light
ring stops flashing and lights up continuously
to indicate that the massager has reached a
comfortable temperature.
, After 30 minutes, the pre-warming function
automatically switches off, but you can also
switch it off by pressing the pre-warming button
again.