Helpful Hints - Salton KM-40 Mode D'emploi

Raising or Lowering the Mixer Head
Press the Mixer Head Tilt Button and raise or lower the Mixer Head until it
clicks into place.

HELPFUL HINTS

1. The Mixer and Mixing Bowl are each driven separately by different
motors and their speeds can be individually adjusted.
2. The Mixer Speed Dial is the 'ON/OFF' switch for both the Mixer Head
and the Bowl. It is also the speed control for the Mixer Head.
3. The Power On indicator light is also the mixing speed indicator. To
select the mixing speed turn the Dial until the required speed is
aligned with the Indicator Light.
HOW TO USE
1. Position the Base on a level, dry and stable work surface next to a
120 volt A.C. outlet. Ensure that the Mixer Speed Dial is in the 'Off' position.
2. Depress the Mixer Head Tilt Button and raise the Mixer Head until it locks
in the raised position.
3. Install the Bowl and BeaterWhisks or Dough Hooks.
4. Ingredients may be added at this time.
5. While pressing the Mixer Head Tilt Button, lower the Mixer Head until it
clicks into place.
6. Plug the Mixer into the outlet. The Power On indicator light will be lit
indicating that power is connected.
7. Select the Mixer speed by slowly turning the Mixer Speed Control Dial to
the desired speed. Select the Bowl speed.
8. Upon completion of mixing, turn the Mixer Speed Dial to the 'Off' position.
NOTE: The Power On indicator light will be lit until the power cord is
unplugged from the outlet.
9. Unplug the power cord.
10. Depress the Mixer Head Tilt Button and raise the Mixer Head until it locks
into the raised position.
11. Press the Accessory Release Button and remove the accessories.
12. Remove the Bowl from the Base.
Booklet KM-40 v1.indd 18
5
2005/10/28 14:29:13