Salton KM-40 Mode D'emploi page 16

POLARIZED PLUG
This appliance has a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not modify the plug in any way.
DESCRIPTION OF PARTS
1. Mixer Base
2. Mixer Head
3. Bowl Speed Dial
4. Mixer Head Tilt Button
5. Mixer Speed Dial
6. Accessory Release Button
7. BeaterWhisks
8. Dough Hooks
9. Stainless Steel Bowl
10. Power On Indicator Light
INTRODUCTION
The Salton Professional Mixer is an advanced mixing system that uses twin
motor, 3-way beating action. One motor is located in the Mixer Head and
powers the individual beaters or dough hooks, turning each in the opposite
direction. One of 10 speeds can be used. The other motor, located in the Base,
drives the bowl at High or Low speed. Together this 3-way action provides
more powerful and uniform mixing results.
BEFORE FIRST USE
1. Unpack and remove all parts and packaging materials from the carton.
2. DO NOT plug the power cord into any outlet before reading these
instructions and ensuring that the Mixer Speed Dial is in the 'Off' position.
3. Wash the Bowl, BeaterWhisks, Dough Hooks and Spatula in warm, soapy
water. Rinse and dry thoroughly.
Booklet KM-40 v1.indd 16
6
9
7
2
10
5
4
3
1
8
3
2005/10/28 14:29:13