Important Safety Instructions; Smart Practices While Driving; Approved Accessories; Electromagnetic Interference - Sharp GX-BT480 Mode D'emploi

Thank you for choosing the SHARP product.

Important safety instructions

Please, read these safety instructions and respect
the following warnings before the appliance is
operated:
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
This symbol means that the product should be disposed
of in an environmentally friendly manner and not with
general household waste.
In order to prevent fire always
keep candles and other open
flames away from this product.
WARNING - PROTECT YOUR HEARING
SHARP DEVICES CAN REACH VOLUMES ABOVE 100 DECIBELS.
PROLONGED USE AT HIGH VOLUMES MAY AFFECT YOUR HEARING
CAPACITY AND MAY RESULT IN NOISE INDUCED HEARING LOSS (NIHL).
TURN OFF THE POWER TO YOUR DEVICE WHEN NOT IN USE.
Please ensure that the device and any associated components such
as ear gels or chargers are stored safely and that any packaging or
unwanted contents are disposed of thoughtfully. Do not place the
product on the floor or leave it in a place where young children could
access it, or someone could trip over it.

Smart Practices While Driving

Check the laws and regulations on the use of mobile devices and
accessories such as your SHARP device in the areas where you drive.
Always obey them.
DO NOT USE MOBILE DEVICES AND ACCESSORIES IN AREAS WHERE
THEIR USE IS PROHIBITED. ENSURE THAT YOUR USE COMPLIES WITH
ANY RESTRICTIONS.
• Your SHARP device lets you communicate by voice when wireless
service is available and safe conditions allow.
• When driving a car, driving is your first responsibility.
• If you choose to use your Bluetooth device while driving, remember
the following tips:
• Get to know your SHARP device and its features such as speed dial
and redial. These features help you to place your call without taking
your attention off the road.
• If you receive an incoming call at an inconvenient time, let your voice
mail answer it for you.
• Let the person you are speaking to know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather conditions.
Rain, sleet, snow, ice, and heavy traffic can be hazardous.
• Do not take notes or look up phone numbers while driving.
Remember that your primary responsibility is driving safely.
• Do not engage in stressful or emotional conversations that may be
distracting.
• Make people you are talking to aware you are driving and suspend
conversations that can divert your attention away from the road.
• In the case of fire, traffic accidents, medical or other serious
emergencies, dial the local emergency number.
• Call roadside assistance or a special non-emergency wireless
assistance number when necessary.
Care and Handling
Your SHARP Bluetooth device is a precision engineered instrument. To
ensure its ongoing performance, you should look after it as you would
any quality consumer electronic product, and use it in accordance with
the instructions.
SHARP recommends that you take the following precautions.
• Avoid leaving your device in direct sunlight, such as on the dashboard
or console of a car or truck. Do not leave your device unattended in
your vehicle.
• Do not leave your device, or use your device, in any area where
the temperature may exceed 60 degrees Centigrade (140 degrees
Fahrenheit), such as inside a closed car on a hot day.
• Remember that on a hot day the temperature inside a closed car may
be significantly higher than the outside air temperature.
• Do not leave your device, or use your device, in any area where the
temperature is likely to drop below 0 degrees Centigrade (32 degrees
Fahrenheit).
• Do not leave your device, or use your device, in any area exposed to
humidity, dust, soot, other foreign objects, smoke, or steam as this
may cause your device to malfunction.
• Do not use any household or industrial grade detergents or cleaners
to clean your device. If your device becomes dirty or smeared, in most
instances a wipe with a dry or slightly damp cloth should be sufficient
to clean it.
• Do not leave your Bluetooth device plugged into a wall or carcharger
for long periods after it is fully charged. SHARP does not recommend
long periods of continued charging.
• Before charging your SHARP device, make sure that the AC outlet,
adaptor and cable are not damaged. If you notice any abnormalities,
seek advice from a qualified professional.
• If traveling internationally, ensure that your SHARP wall or car power
adapter is approved for use in the country where you plan to use it
and hat the adapter voltage is suited to the local power supply.
• Should a fault develop with your SHARP product, contact SHARP for
advice on how to proceed.
• Do not attempt to repair or alter any SHARP product yourself.

Approved Accessories

The use of accessories not approved by SHARP, including but not limited
to batteries, antennas, wall adapters, car chargers, ear gels and foam tips
and convertible covers, may cause your SHARP device to malfunction or
in the case of non-approved electrical accessories may cause the device
to exceed RF energy exposure guidelines.
Use of non approved accessories will void your device's warranty.

Electromagnetic Interference

Nearly every electronic device is susceptible to electromagnetic
interference (EMI) if inadequately shielded, electromagnetic configured
for electromagnetic compatibility. Similar to a mobile phone, your
SHARP device is a low power transmitter / receiver and is covered by
regulations pertaining to such devices. Turn off your SHARP device in
any facility where posted notices instruct you to do so. These facilities
may include hospitals or health care facilities that may be using
equipment that is sensitive to external RF energy.
• When instructed to do so, turn off your SHARP device when on board
an aircraft. Any use of a mobile device must be in accordance with
applicable laws, regulations and airline crew instructions.
• Some Bluetooth devices may interfere with some hearing aids. In the
event of such interference, you may want to consult your hearing aid
manufacturer or physician to discuss alternatives.
• If you use any other personal medical device, consult the
manufacturer of your device to determine if it is adequately shielded
EN