Dirt Devil NAVIGATOR M608 Mode D'emploi page 54

7 Troubleshooting
Problem
Red LED is blinking Bumper is stuck.
fast and blue LED is
Move robot to an area without obstacles and restart.
blinking slowly in
Bumper function is impaired by debris inside the bumper.
combination with
Remove the blockage inside the bumper and restart.
2 long beeps
Side brush has The side brush might be prevented by dirt from turning freely.
stopped turning.
Remove the side brush (ZChapter 7.3, "Removing and cleaning the main
brush") and free it and its receptacle of dirt. If necessary, carefully use scis-
sors or tweezers.
Main brush has The main brush might be prevented by dirt from turning freely.
stopped turning.
Remove the main brush (ZChapter 7.3, "Removing and cleaning the main
brush") and free it and its receptacle of dirt. If necessary, carefully use scis-
sors or tweezers.
Robot will not char- The AC adapter is not plugged in properly.
ge.
Check whether the plug or the AC adapter are fitted correctly in their so-
ckets (ZChapter 3.3, "Connecting the docking station").
The toggle switch underneath the robot is not switched to "on" position
("0").
Switch the toggle switch to "on" position ("I"), ZChapter 3.4, "Charging the
battery pack for the first time".
The operating time Drive wheel, side brush or main brush stuck.
is becoming in-
Switch off your robot via the "On/Off" key (
creasingly shorter.
remote control and remove dirt from wheels and brushes, ZChapter 7.3,
"Removing and cleaning the main brush". If necessary, carefully use scis-
sors or tweezers.
NOTE:
If you cannot solve the problem using this table, contact our service representative (ZPage 202,
'International Service') and describe the problem. Our service personnel are specially trained for
such cases and can help you get to the bottom of the matter in a systematic manner, and solve
the problem together with you. In this way, any inconvenience of having to send your vacuum
robot to us can be avoided, and you can use it again quickly.
54
All manuals and user guides at all-guides.com
Possible cause / solution
) or the " " key on the