Lubrication - Mountfield 4140H Mode D'emploi

7.11 LUBRICATION

All lubrication points in accordance with the table
below must be lubricated every 50 hours of opera-
tion as well as after every wash.
Object Action
Centre point 4 grease nipples.
Use a grease gun filled with
universal grease. Pump until
the grease emerges.
Steering Brush the chains clean with a
chains wire brush.
Lubricate with universal
chain spray.
Tensioning Lubricate the bearing points
arms with an oil can when each
control is activated.
Ideally carried out by two
people.
Control Lubricate the cable ends with
cables an oil can when each control
is activated.
Must be carried out by two
people.
7.12 FUSE
In the event of electrical faults, check/replace the
fuse, 20 A. See 15:S.
8 PATENT - DESIGN REGISTRA-
TION
This machine or parts thereof is covered by the fol-
lowing patent and design registration:
SE9901091-0, SE9901730-3, SE9401745-6,
US595 7497, FR772384, DE69520215.4,
GB772384, SE0301072-5, SE04/000239 (PCT),
SE0401554-1, SE0501599-5.
9 SERVICE
Authorised service workshops carry out repairs
and guarantee service. They use original spare
parts.
Original spare parts are supplied by service
workshops and by Many dealers.
We recommend that the machine be handed in to
an authorised service workshop for service,
maintenance and checking of the safety devices
once a year.
All manuals and user guides at all-guides.com
ENGLISH
Fig-
ure
19
-
20
20
10 PURCHASE TERMS
A full guarantee is issued against Manufacturing
and material defects. The user must carefully fol-
low the instructions given in the enclosed docu-
mentation.
Guarantee period
For consumer use: two years from purchase date.
For batteries: six months from the purchase date.
Exceptions
The guarantee does not cover damage due to:
- neglect of the user to acquaint himself with ac-
companying documentation
- carelessness
- incorrect and non-permitted use or assembly
- the use of non-genuine spare parts
- the use of accessories not supplied or approved
by GGP
Neither does the guarantee cover:
- wearing components such as blades, belts,
wheels and cables
- normal wear
- engine and transmission. These are covered by
the appropriate Manufacturer's guarantees with
separate terms and conditions.
The purchaser is covered by each country's
national laws. The rights to which the purchaser is
entitled with the support of these laws are not
restricted by this guarantee.
11 ENVIRONMENT
For environmental reasons, we recommend that
particular attention is given to the following
points:
• Always use Alkylate petrol ("Environmental
petrol").
• Always use a funnel and/or a petrol can with
overfill protection to avoid spillage when filling
with petrol.
• Do not fill the petrol tank right to the top.
• Do not fill too much engine and/or transmission
oil (see user instructions for the correct
amount).
• Collect up all oil during oil changes. Do not
spill any. Hand in the oil to a recycling station.
• Do not discard replaced oil filters with normal
rubbish. Hand them in to a recycling station.
• Do not discard replaced lead batteries with
normal rubbish. Hand in to a battery collection
point for recycling.
• Replace the silencer if it is broken. Always use
original spare parts when carrying out repairs.
• If the machine was originally equipped with a
EN
17