Bushnell Elite e2 Mode D'emploi page 9

NECKSTRAP ATTACHMENT : (Fig. 7 and 8)
To attach the short strap adapter, first align the strap with the plastic post positioned as shown in Fig. 7. Push the
post straight down onto the release button (white arrow), then slide it up towards the eyepiece (black arrow) as shown
in Fig. 7, until it clicks into place. Make sure the release button pops back up. The long neckstrap may be looped
through the lugs on the short straps either before or after this procedure. To remove the strap, press the release button,
and slide the post back out of the socket (Fig. 8).
Strap Attachment Socket
TRIPOD SOCKET : (Fig. 9)
To attach the Elite e 2
threaded socket inside the center hinge, and set it aside in a safe place. Use a compatible binocular tripod adapter, such
as the Bushnell model #161001CM, (a accessory bracket, shown below, which goes between the binocular and tripod)
to attach your Elite e 2 to any standard tripod in a horizontal position to provide a stable image during prolonged
viewing.
Elite e2 Binocs 6LIM.indd 9
Fig. 7
to a tripod or monopod, unscrew (counter-clockwise) the "B" logo cap which covers the
Fig. 9
Binocular Tripod
Adapter (optional)
(Bushnell#161001CM)
Fig. 8

3/23/07 5:02:08 PM