Ec Declaration Of Conformity - Hilti DD 100 Mode D'emploi

Disposal
Most of the materials from
which Hilti power tools are
manufactured can be recycled.
The materials must be correct-
ly separated before they can be recycled.
In many countries, Hilti has already
made arrangements for taking back your
old electric tools for recycling. Please
ask your Hilti customer service depart-
ment or Hilti sales representative for fur-
ther information.
Disposal of drilling slurry
With regard to environmental aspects,
allowing drilling slurry to flow directly
into rivers, lakes or the sewerage system
without suitable pre-treatment is prob-
lematical. Ask the local authorities for
information about applicable regulations.
We recommend the following pre-treat-
ment:
Collect the drilling slurry (e.g. use a wet-
type industrial vacuum cleaner).
Allow the slurry to settle and dispose of
the solid material at a construction waste
disposal site (the addition of a flocculent
may accelerate the settling process).
Water from the drilling slurry (alkaline,
ph value > 7) should be neutralized by
adding an acidic neutralizing agent or
large quantity of water before it is
allowed to flow into the sewerage sys-
tem.
Printed: 07.07.2013 | Doc-Nr: PUB / 5069508 / 000 / 00
All manuals and user guides at all-guides.com
Only for EU countries
Disposal of electric tools together with
household waste is not permissible!
In observance of European Directive
2002/96/EC on waste electrical and elec-
tronic equipment and its implementation
in accordance with national law, electric
tools that have reached the end of their
life must be collected separately and
returned to an environmentally compati-
ble recycling facility.

EC declaration of conformity

Designation:
Type:
Year of design:
We declare, on our sole responsibility, that this product complies with the following
directives and standards: until 28.12.2009 98/37/EG, as of 29.12.2009 2006/42/EG,
2004/108/EG, EN 55014-1, EN 55014-2, EN 61000-3-2, EN 61000-3-3, EN 60745-1,
EN 60745-2-1
Hilti Corporation
Peter Cavada
Head of BU
Quality and Process Management
BA Electric Tools & Accessories
05/2007
Diamond drilling system
DD 100
1992
Ivo Celi
Head of BU
Diamond
05/2007
29