White&Brown MF 260-Slim Cooking Mode D'emploi page 22

All manuals and user guides at all-guides.com
notice_MF260 14/03/07 15:23 Page 22
b- Cooking
- Plug in the appliance.
- Place the food to be cooked in the oven.
- Select the steam or combined steam function using the function selector (7).
- Set the required temperature using the thermostat (4). The temperature set will be that of
the grill. In steam only mode, the temperature adjustment is inactive.
- Set the cooking time by adjusting the timer (6).
- The timer starts counting down, the "On" indicator light comes on and the appliance starts
heating. The steam begins to diffuse within a few minutes.
- After cooking, when the set time has elapsed, the appliance switches itself off
automatically.
- To stop the oven before the end of the set time, set the function selector (7) to the "stop"
position.
c- After steam cooking
Never leave water in the oven when not in use.
Instructions to be followed in all cases to ensure the correct upkeep and long service life
of your oven:
- After cooking, unplug the oven.
- Empty the water tank.
- Place a flat receptacle under the draining pushbutton (3). Push the tab upward and block it
in the notch provided. Allow the water contained in the internal tank of the oven to run out
until it is empty.
- Remove the drip tray (11), empty it and clean it.
- Plug the oven back in and operate it for 10 minutes in convection mode at 180°C to dry the
cavity thoroughly.
Regularly, or if a large quantity of liquid has poured into the bottom of the oven, carry out
complete cleaning of the steam system:
- Allow the oven to cool down.
- After complete cooling, unplug the oven.
- Unscrew the two steam diffusion nozzles (13) and remove the steam diffusion plate (12).
Clean these components by hand or in a dishwasher. Dry them carefully.
- Also clean and dry the inside of the oven, being careful not to damage the heating
element.
- Put the steam diffusion plate back in place and attach it by screwing the two steam
diffusion nozzles back in.
22