Wiring Diagram; Need Help - Jensen VM8113 Instructions D'installation

Wiring Diagram

IMPORTANT: Incorrect wiring connections can damage the unit. Follow the wiring instructions carefully, or
have the installation handled by an experienced technician.
When wiring is complete, reconnect the battery negative terminal.
Battery
-
Connect the yellow wire to the
battery or 12 volt power source that
is always live. This wire MUST be
connected for the radio to work.
Yellow
Chassis Ground
Connect the black wire to the factory ground wire. If a
factory ground wire is not provided, locate a clean,
unpainted metal part of the dash and secure the ground
wire with a "ring" terminal and a sheet metal screw.
White/Black
Stripe
Left Speaker
(Front)

Need Help?

For technical assistance, call the
Jensen customer support line at
1-800-323-4815.
All manuals and user guides at all-guides.com
Antenna
FILTER
BOX
Black
FRONT
Gray/Black
White
Gray
Stripe
Right Speaker
(Front)
Subwoofer Out
Parking (Pink)
Camera In
Video Out
Fuse (15A)
Camera (Green/White)
Steering Wheel Control (SWC)
(Requires PAC SWI-PS Interface
Adapter, Sold Separately)
Rear Line Out
Gray
Front Line Out
Black
Auto Antenna Control
Connect to antenna control lead and
power supply of antenna amplifier.
Tape bare end of wire if not used.
Blue
Accessory/Ignition
Connect to existing radio wire
or radio fuse.
Red
REAR
Purple/Black
Green/Black Green
Stripe
Left Speaker
(Rear)
4
(Blue)
(Yellow)
(Yellow)
R (Red)
External Power Amplifier
L (White)
R (Red)
L (White)
Purple
Stripe
The pink parking
connected to the
switched side of the
parking break circuit
becomes grounded
when the brake is
Right Speaker
(Rear)
+
IMPORTANT!
wire MUST be
(the part that
applied).