LENCO TCD-974 Mode D'emploi page 45

REMARK:-
MP3 TRACK FORMAT REQUIREMENT:-
- MP3 BIT RATE: 32 KBPS~256 KBPS.
- THE PERFORMANCE OF PLAYING MP3 DISC IS VARIOUS FROM THE QUALITY OF RECORDING DISC AND
THE METHOD OF RECORDING. FURTHERMORE, THE SEARCHING LEAD-TIME FOR MP3-CD IS LONGER
THAN NORMAL CD DUE TO DIFFERENCE FORMAT.
 REPEAT/INTRO/RANDOM
PRESS THE "REPEAT/INTRO/RAN" BUTTON (8) DURING PLAYBACK TO SELECT REPEAT, INTRO AND
RANDOMFUNCTION, A SINGLE TRACK, SINGLE FOLDER (MP3 ONLY) OR ALL THE TRACKS CAN BE PLAYED
IN DIFFERENCE MODE AS FOLLOW:
FOR CD
(1) REPEAT 1 (2) REPEAT ALL TRACK
PLAY MODE INDICATORON LCD DISPLAY
REPEAT TRACK
REPEAT ALL ALL
INTRO INTRO
RANDOM RAN
OFF MODE --------------
FOR MP3 DISC/FILE
(1) REPEAT 1 (2) REPEAT ALL TRACKS
(6) OFF MODE
PLAY MODE
REPEAT SINGLE TRACK
REPEAT ALL TRACKS
REPEAT SINGLEFOLDER
INTRO
RANDOM MODE
OFF MODE
REPEAT PLAY

YOU CAN LISTEN THE DESIRED TRACKS OR FOLDER REPEATEDLY BY THIS FUNCTION.
INTRODUCTION PLAY

YOU CAN LISTEN THE FIRST 10 SECONDS OF EACH TRACK BY THIS FUNCTION.
RANDOM PLAY

YOU CAN LISTEN ALL THE TRACKS OR FOLDER IN A RANDOM ORDER BY THIS FUNCTION
CD / MP3 DISC PROGRAMMING
UP TO 32 TACKS CAN BE PROGRAMMED FOR DISC PLAY IN ANY ORDER. BEFORE USE, BE SURE TO PRESS
STOP
THE " "BUTTON (13)
1. SET IN CD MODE & STOP THE PLAYBACK.
2. PRESS THE "MEM/CLK-ADJ" BUTTON (7), " MEMORY" WILL APPEAR ON LCD DISPLAY (2). MOREOVER, IT
WILL INDICATE PROGRAM NO. AND DIGITS FOR TRACK NO. TO BE PROGRAMMED– "P01 001 ".
3. SELECT A DESIRED TRACK BY PRESSING SKIP UP
4. PRESS THE "MEM/CLK-ADJ" BUTTON (7) TO STORE THE TRACK INTO MEMORY.
5. REPEAT STEPS 3 AND 4 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY.
6. WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS "
All manuals and user guides at all-guides.com
(4) INTRO
(4) RANDOM (5) INTRO
INDICATORON LCD DISPLAY
ALL
INTRO
RAN
-----------------
GB- 4
(3) RANDOM
(3) REPEAT 1 FOLDER
OR DOWN BUTTONS (17).
" BUTTON (14) TO PLAY THE
(5) OFF MODE