Settings And Extended Functions - Klarstein SWEET DREAMS Mode D'emploi

SETTINGS AND EXTENDED FUNCTIONS

Cancel ice cream production
To stop ice cream production, press and hold START / STOP during ice cream
production for 3 seconds, or press the POWER button.
Setting the timer during ice cream production
You can also change the set time while the device is already running. Press the TIMER
button repeatedly. Each push of the button adds 5 minutes to the running time until the
maximum of 60 minutes is reached. The set time is shown on the display. The running
time can only be increased but not decreased.
Adding time after ice cream production
When the preset time has elapsed, the device will stop and enter the cooling mode. If
you like your ice cream harder, you can restart the device and set the timer to 10–60
minutes again. Then, press START / STOP to restart the device. When the timer has
expired, the device will stop again and enter the cooling mode so that the ice cream
does not thaw.
Important information about the amount of ingredients: To prevent overflow
and unnecessary waste, make sure that the removable bowl is filled to a maximum of
60%. Ice cream expands during ice production.
Storing the prepared ice cream
Remove the inner bowl, and use a plastic or wooden spoon to fill the ice cream into a
container suitable for freezing. To avoid scratching the surface of the bowl, do not use
metal scoops or kitchen utensils.
EN
19