Ezviz CS-CV240-B0-21WFR Mode D'emploi page 8

RST button
• If the camera fails to connect to your Wi-Fi network, press and hold the RST
button for 5s and repeat Step 2.2.
• To select another Wi-Fi network, press and hold the RST button for 5s to reboot
the device.
3. To Change the Default Password (Optional)
The camera uses the verification code found on the bottom of the camera as the default
password. After adding the camera to your network, you will be required to change the device
password to ensure video security. The password is used for Image Encryption, too. If you
turn on the Image Encryption, you will be required to input your password when you view live
video or playback stored video from the camera.
r- Go to the camera settings screen to change the default password.
- Tap on "Change Password".
Scan QR Code
3