First Time Operation; Lighting The Appliance - BLAZE BLZ-GRIDDLE-LTE-LP Guide D'utilisation Et D'entretien

Caution: Never operate the appliance unattended.
and get seriously burned. All gas appliances should be attended at all times.
Prior to using your appliance, verify that all of the following is correct:
The burner tubes are free of any debris or obstruction.

Installation of the proper gas type and regulator settings.

The proper gas connection is complete.

Check for gas leaks.

Minimum clearances are maintained.

All packaging has been removed.

All parts and components are properly in place.

An installer-supplied manual gas shut-off valve is fully accessible.

Gas hoses are clean and inspected for cuts, wear, abrasion, or leaks. Replace if necessary with a suitable

UL, ETL or CSA Listed part with internally threaded connector.

Lighting the Appliance

Remove the Protective Stainless cover from the Griddle Plate
1.
Use caution when lighting burners by standing as far away from the burners as possible. Do not put your hands,
2.
arms, head or any body parts close to the griddle when lighting.
To ignite burners, push the burner knob in and slowly rotate counter-clockwise to the high position.
3.
You will hear a loud click as the electronic lighter produces a spark. Listen for the sound of the gas igniting and
4.
look for a flame through the circular openings in the front of the griddle plate. If the burner does not light on the
first try, repeat immediately
FIRST-TIME OPERATION
Blaze Outdoor Products Instructional Book
The surface is extremely hot and someone can touch the hot surface
Page | 25