Télécharger
Partager
Imprimer la page
  1. Manuels
  2. Marques
  3. R&G Manuels
  4. Accessoires de moto
  5. FI0103BK
  6. Instructions de montage

R&G FI0103BK Instructions De Montage

Masquer les pouces

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

Télécharger ce manuel
FITTING INSTRUCTIONS FOR FI0104BK FRAME INSERT
KAWASAKI NINJA H2 2015- UPPER RIGHT OR LEFT HAND SIDE
THIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED BELOW.
DO NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT.
Please note that the way the kit is packed does not necessarily represent the way of mounting to
the bike
T
(
)
HE PARTS SHOWN MAY BE REPRESENTATIVE ONLY
FOR CLARITY OF INSTRUCTIONS ONLY
FRAME INSERT (FI0104) (x1)
SPECIAL NUT
(H0035) (x1)
M5x12mm LONG COUNTER SUNK BOLT (x1)
R&G Racing
Unit 1, Shelleys Lane, East Worldham, Alton, Hampshire, GU34 3AQ
Tel: +44 (0) 1420 89007 | Fax : +44 (0) 1420 87301 | Email: info@rg-racing.com

Publicité

loading

Manuels Connexes pour R&G FI0103BK

Sommaire des Matières pour R&G FI0103BK

  • Page 1 FITTING INSTRUCTIONS FOR FI0104BK FRAME INSERT KAWASAKI NINJA H2 2015- UPPER RIGHT OR LEFT HAND SIDE THIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED BELOW. DO NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT. Please note that the way the kit is packed does not necessarily represent the way of mounting to the bike HE PARTS SHOWN MAY BE REPRESENTATIVE ONLY FOR CLARITY OF INSTRUCTIONS ONLY...

  • Page 2: Tools Required

    Please note that in cases where kits are packed with rubber washers holding the components onto the bolt – the rubber washers should be thrown away! TOOLS REQUIRED  3mm metric Allen key. Right or Left-hand side (Upper)  Fit the counter sunk headed bolt through frame insert so head sits in counter-sink. ...

  • Page 3: Outils Requis

    INSERT CADRE (FI0104) (x1) ECROU SPECIAL (H0035) (x1) M5x12mm BOULON (x1) Notez que si les kits sont emballés avec des rondelles en caoutchouc servant à tenir les composants, ces rondelles doivent être jetées. Outils requis  Clé Allen 3mm. Coté droit ou gauche supérieur (Supérieur) ...
  • Page 4 FITTING INSTRUCTIONS FOR FI0105BK FRAME INSERT KAWASAKI NINJA H2 2015- MIDDLE RIGHT OR LEFT HAND SIDE THIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED BELOW. DO NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT. Please note that the way the kit is packed does not necessarily represent the way of mounting to the bike HE PARTS SHOWN MAY BE REPRESENTATIVE ONLY FOR CLARITY OF INSTRUCTIONS ONLY...
  • Page 5 TOOLS REQUIRED  3mm metric Allen key. Right or Left-hand side (Middle)  Fit the counter sunk headed bolt through frame insert so head sits in counter-sink.  Place special nut on exposed end of bolt so tapered face goes into tapered recess. ...
  • Page 6 INSERT CADRE (FI0105) (x1) ECROU SPECIAL (H0035) (x1) M5x16mm BOULON (x1) Notez que si les kits sont emballés avec des rondelles en caoutchouc servant à tenir les composants, ces rondelles doivent être jetées. Outils requis  Clé Allen 3mm. Coté droit ou gauche supérieur (Milieu) ...
  • Page 7 FITTING INSTRUCTIONS FOR FI0106BK FRAME INSERT KAWASAKI NINJA H2 2015- LOWER LEFT HAND SIDE THIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED BELOW. DO NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT. Please note that the way the kit is packed does not necessarily represent the way of mounting to the bike HE PARTS SHOWN MAY BE REPRESENTATIVE ONLY FOR CLARITY OF INSTRUCTIONS ONLY...
  • Page 8 TOOLS REQUIRED  3mm metric Allen key. Left-hand side (Lower)  Fit the counter sunk headed bolt through frame insert so head sits in counter-sink.  Place special nut on exposed end of bolt so tapered face goes into tapered recess. ...
  • Page 9 INSERT CADRE (FI0106) (x1) ECROU SPECIAL M5x12mm BOULON (x1) (H0035) (x1) Notez que si les kits sont emballés avec des rondelles en caoutchouc servant à tenir les composants, ces rondelles doivent être jetées. Outils requis  Clé Allen 3mm. Coté gauche inférieur (Inférieur) ...
  • Page 10 FITTING INSTRUCTIONS FOR FI0107BK FRAME INSERT KAWASAKI NINJA H2 2015- LOWER RIGHT HAND SIDE THIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED BELOW. DO NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT. Please note that the way the kit is packed does not necessarily represent the way of mounting to the bike HE PARTS SHOWN MAY BE REPRESENTATIVE ONLY FOR CLARITY OF INSTRUCTIONS ONLY...
  • Page 11 TOOLS REQUIRED  3mm metric Allen key. Right-hand side (Lower)  Fit the counter sunk headed bolt through frame insert so head sits in counter-sink.  Place special nut on exposed end of bolt so tapered face goes into tapered recess. ...
  • Page 12 INSERT CADRE (FI0107) (x1) ECROU SPECIAL (H0035) (x1) M5x12mm BOULON (x1) Notez que si les kits sont emballés avec des rondelles en caoutchouc servant à tenir les composants, ces rondelles doivent être jetées. Outils requis  Clé Allen 3mm. Coté droit inférieur (Inférieur) ...
  • Page 13 FITTING INSTRUCTIONS FOR FI0108BK FRAME INSERT KAWASAKI NINJA H2 2015- FRONT RIGHT HAND SIDE THIS KIT CONTAINS THE ITEMS PICTURED AND LABELLED BELOW. DO NOT PROCEED UNTIL YOU ARE SURE ALL PARTS ARE PRESENT. Please note that the way the kit is packed does not necessarily represent the way of mounting to the bike HE PARTS SHOWN MAY BE REPRESENTATIVE ONLY FOR CLARITY OF INSTRUCTIONS ONLY...
  • Page 14 TOOLS REQUIRED  3mm metric Allen key. Right-hand side (Front)  Fit the counter sunk headed bolt through frame insert so head sits in counter-sink.  Place special nut on exposed end of bolt so tapered face goes into tapered recess. ...
  • Page 15 Notez que si les kits sont emballés avec des rondelles en caoutchouc servant à tenir les composants, ces rondelles doivent être jetées. Outils requis  Clé Allen 3mm. Coté droit (avant)  Passer le boulon à travers l’insert de cadre de façon à ce que la tête se place dans le contre alésage. ...