Memory Card - Spypoint FL-A Manuel De L'utilisateur

All manuals and user guides at all-guides.com
24 25

MEMOrY CArD

The SD slot in the SPYPOINT camera model IR-A can accept
optional SD memory cards up to 8GB. Before inserting or
removing the memory card, the camera MUST be turned off.
Failing to do so may cause loss of photos or damage to the
memory card. When the internal memory or the SD card is full,
the LCD panel will show "FULL". The following data shows
an approximate quantity of photos that can be recorded by the
camera depending on the memory card capacity.
SETTINGS
Picture Quality, Date and Time
Turn off your camera, set the mode switch to "Set/Test" and set
the power switch to "ON". Press "MENU" once. The default
setting "H" (4MP) icon will flash. Use "DOWN" if you want to
change to "L" resolution (3MP). Press "MENU" button to set
date and time. Use "UP" and "DOWN" to change the blinking
number. Press "MENU" to set next option. Press "OK" and turn
off the system to record the changes. The camera's internal
memory (32MB) can store approximately 65 pictures in 3MP
mode (low resolution) and 39 pictures in 4MP mode (high
resolution). The SD slot accepts optional SD card to record
more pictures.