Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
22
FEATUrES
• Still photos
• Video resolution
• File formats
• External memory
• Internal memory
• Exposure
• Play modes
• TV-out
• PIR distance
• Motion detection angle
• Power source
• Operating temperature
• Storage temperature
• Computer operating system
KIT INCLUDES
• SPYPOINT FL-A camera
• Mounting Kit
• USB cable
• Video cable
• User's Manual
All manuals and user guides at all-guides.com
4 MP
640 x 480
JPG/AVI
SD card up to 8 GB
32 MB built-in memory
Auto
Computer / TV
PAL / NTSC
Adjustable from 5 to 45 ft.
95°
6 AA-cell batteries or
external 12V DC power jack
or lithium rechargeable
battery pack
(-20 °C to +50 °C)
(-4 F to +122 F)
(-30 °C to +75 °C)
(-22 F to + 167 F)
WIN 2000 / XP / VISTA /
Mac OS X
MAIN FEATUrES
•
LCD display mode: date, time and number of pictures.
•
Adjustable PIR sensitivity.
•
Color day and night time images.
•
Multi-shot of 1, 2, 3 or 4 pictures per detection.
•
Video length adjustable from 10 to 90 sec.
•
Ajustable delay between motions from 15 sec to 5 min.
•
Removable internal camera for easier handling
•
Water-resistant housing case.
•
Date and time stamp on each picture.
•
Auxiliary power jack for external 12 V DC input.
•
Replace the Flash by optional infrared LED module
POWEr
Alkaline batteries
This camera requires 6 type "AA" batteries. We recommend
the use of good quality alkaline batteries. Install the batteries
according to the instructions inside camera case. Exact polarity
MUST be followed. Battery power is displayed on the LCD
panel. The camera will take pictures even if the batteries are
half full, but we strongly recommended that you replace them
before they are empty. (See figure below)
Lithium battery pack LIT-C-8
SPYPOINT camera model FL-A can be operated with a
rechargeable lithium battery pack (sold separately). This type
of battery is much less affected by cold temperatures and lasts
up to 3 times alkaline batteries.
12V Power
SPYPOINT camera model IR-A can be used with an external
12V DC input. When using 12V DC power, we recommend
removing alkaline batteries to prevent surcharges. A 12V cable
CB-12ft (sold separately) allows connecting the camera to a
12V battery.
23
Publicité
Table des Matières
