Remove splints and sawdust only with a brush or vacuum
cleaner.
Clean and oil all moving parts regularly.
Never use any grease!
Use for instance sewing machine oil, liquid hydraulic
fluid or environmentally acceptable spray oil.
Ensure that the saw blade remains free of rust and resin
Remove all resin residues from the saw bench top
Resin residues can be removed with a commercial
maintenance and care spray.
The saw blade is a wearing part and becomes blunt after
long or frequent use. This could, amongst others, also
affect the noise emission.
renew the saw blade or have it sharpened
Maintenance
Changing the saw blade
Before replacing the saw blade:
− Switch off device
− wait for stop of saw
− Pull out power plug
Do not use any saw blades made of HSS steel.
Do not use any cracked saw blades or such that have
changed their shape.
Only use well-sharpened saw blades
Danger of cutting! Wear gloves when replacing the saw
blade.
Use only suitable saw blades.
Danger of burning! The saw blade is still hot shortly
after cutting.
Lower the saw blade all the way.
Loosen the screws (23) and fold the chip box cover (22) up.
Loosen the saw blade by setting wrench 24 at the nut and
loosening it in the direction shown, countering with wrench 25.
Remove the hex nut and the saw blade flange. Pull the saw
blade off.
Clean the flange.
Fit the new saw blade in reverse order.
Note the direction in which the saw blade turns (see arrow
on saw blade).
Replacing the table insert
Immediately replace a worn or damaged table insert.
1. Loosen the screw (27) and pull the protective cover (10) off
the blade guard (8).
2. Loosen the screws of the table insert (11) and remove them.
3. Insert a new table insert and screw it tightly in place.
4. Finally, fit the safety guard (10) again.
All manuals and user guides at all-guides.com
22
24
-
9
-
11
Transport
Remove mains plug before each transport.
The saw must only be transported with the saw blade
lowered and the protective cover in position.
This will avoid possible injury from the saw blade.
When transporting the machine, do never use guards for
handling or transportation (e.g. protective cover or splitting
wedge)
Storage
Remove the mains plug
from the socket.
Store unused equipment in a dry, locked place out of the
reach of children.
To extend the service life of the saw and guarantee smooth
operation, before storing for a longer period
− thoroughly clean the saw
− treat all movable parts with an environmentally friendly oil
Never use any grease!
Guarantee
Please observe the enclosed terms of guarantee.
22