Candy CSE V9DF-S Manuel D'utilisation page 61

START SMART TOUCH
Simultaneously pressing the START/PAUSE
and ANTI CREASE buttons allows a
previously downloaded cycle to be started
whilst the Smart Touch position is selected
on the programme knob (for downloading
cycles from the App see the relevant
section of this user manual).
KEY LOCK
Pressing simultaneously the buttons "E"

and "F" for about 2 seconds, the
machine allows you to lock the keys. In
this way, you can avoid making accidental or
unwanted changes if a button on the
display is pressed accidently during a cycle.
The key lock can be simply cancelled by

pressing the two buttons simultaneously
again.
In case of opening of porthole with

activated KEY LOCK, the cycle stops but
the lock is kept: to restart the cycle, you
must remove the
START/PAUSE again.
KEY LOCK can be modified at any time

of the cycle.
Display
The display shows the remaining time for
drying, the postponed time in case of
delayed start selection
notifications setting.
2
lock and press
and other
1 5 4 3
61
1) DRYING SELECTION INDICATOR
LIGHTS
The indicator lights display the degrees of
dryness that can be selected by the
relevant button.
2) FILTER CLEANING INDICATOR LIGHT
It lights up when the cleaning of the filter is
requested.
3) ANTI CREASE INDICATOR LIGHT
The indicator light shows the selection of
the relevant option.
4) RAPIDS INDICATOR LIGHTS
The indicator lights show the selected time
of the rapid cycles.
5) COOLING INDICATOR LIGHT
It lights up when the cycle is in the cooling
phase.