ELECTRICAL REQUIREMENTS
Connect the main leads to a standard 120V±10% (60Hz±1Hz) electrical supply which has protection
devices of under-voltage, over-voltage, over-current as well as a residual current device (RCD)
which the maximum residual current is rated at 0.03A.
CONTENTS OF THE SHIPPING CONTAINER
A. Log Splitter ..................................1 set
B. Support Leg ................................1 pc
C. Owner's Manual ..........................1 pc
D. Loose Part Bag (containing)
M8 Bolts & Nuts ......................5 sets
A
Note: Hardware to mount this log splitter to
a work bench is NOT supplied.
D
B
C
6