Faults And How To Remedy; Spare Parts - Wolf Garten Power Edition 40 E Mode D'emploi

Maintenance
Cleaning
Note: Disconnect electricity by unplugging cable
at the socket before proceeding. ttention: Keep
hands clear of moving blade.
Clean mower thoroughly after each mowing with cloth or
brush.
Do not spray with water.
Winter Storage
• Clean mower thoroughly before storing away.
• Have your mower thoroughly checked once a year by an
approved Service Centre.
• Do not store it in a wet or humid place.

Faults and how to remedy

Problem Possible cause
Uneven running, heavy • Blades damaged
vibrations in the mower • Blades loose in the fastening parts
• Fuse blown
• Cable damaged
Motor will not run
In the interest of safety, never touch damaged or servered
cables before disconnecting the mains plug. Repairing the
cable with insulating tape is prohibited.
• Blunt blades
Poor mowing
• Incorrect cutting height
• Blunt blades
Poor catching • Catcher bag blocked
• Incorrect cutting height
Drive does not start • Clutch Bowden cable misadjusted
When in doubt, always consult a WOLF service workshop.
Important: switch off the mower and disconnect the mains plug before inspecting, cleaning or working on the blades.

Spare parts

Item number
4628 065
4001 094
4350 040
Supplied by your dealer
14
All manuals and user guides at all-guides.com
Important! If you inadvertently cut through the
cable, the fuse (16 mp.) will not always blow.
Order description
Vi 40 W
Vi WM
Change of cutter blade S
lways disconnect mains supply and wear
protective gloves before undertaking any work at
the cutter blades, cutter bar and blade coupling.
• Change of blades only be carried out by an approved service
station.
• Damaged blades should always be replaced in pairs to
ensure even balance.
Information for Service Centre, blade retaining screw to
be tightened to: /F 13 mm = 16-18 Nm
djusting the Bowden cable coupling T
1. Raise the drive bracket (1) app. 2 cm and hold.
2. Loosen the locking nut (2).
3. Turn the setscrew (3) left until the drive wheels are blocked
when you pull the mower backwards.
4. Tighten locking nut (2).
WOLF
service-workshop
---
---
---
---
---
---
Product information
Grass catcher
Replacement blade 40 cm
blades (2 pieces)
Remedy (X) by:
Yourself
X ---
X
X
X ---
X ---
X
X ---
X
X
X