Kubota GZD15-3 LD Instructions De Montage page 7

4. Unlocking both ends of the rear axle
Remove the snap pins off both ends of the rear axle,
and draw out the headed pins.
(1) Snap pin
(2) Headed pin
5. Remove the fixtures (1), (2), (3), (4) from the machine
front as shown in the figure below.
Join the fixtures (1), (3), (4) to the iron crate bottom.
(1) Stay
(2) Nut
(3) Bolt
(4) Nut
All manuals and user guides at all-guides.com
3