Sharp FU-S40E Manuel D'utilisation page 9

2
Install the filters
1 Place the HEPA Filter within the
main unit.
Please make sure that the HEPA
Filter(blue) and the tab is placed in
proper direction.
Do not install the filter backwards or the
unit will not operate properly.
2
Place the Filter Support
through the bands (2 places)
located at the corners of the
Active Carbon Filter.
3 Replace the Filter Support and Active
Carbon Filter back to the main unit
Fill in the usage start date on the
4
Date Label.
Use the date as a guide for the Filter
Replacement schedule.
5 Replace the Front Panel.
Place the Front Panel from the obliquely upward,
then mount the hooks at the bottom.
All manuals and user guides at all-guides.com
Filter Support
Active Carbon Filter
E-7
Tab
(blue)
HEPA Filter
Filter Support
Front Panel
Band(blue)
Date Label