Patton PATRON Serie Notice D'emploi page 4

SAFETY INFORMATION
 Never operate this BBQ without a pressure regulator.
 If the regulator is not supplied with your barbecue - depending on which gas you
decide to use – turn to your local gas dealer for a regulator.
 The following supply pressures are a guide only.
REGULATOR AND HOSE ASSEMBLY:
 Must be suitable for Liquid Petrol Gas (LPG).
 Must withstand the above-mentioned pressures.
 May not exceed 1.5 metres in length.
 The flexible hose should be a hose connected with an adaptor.
 Use an appropriate Jubilee clip or twin-eared fastener to connect the hose to the BBQ
adaptor to secure the hose/regulator connection.
 After the assembly has been secured, turn on the gas and check for leaks. See
Checking For Gas Leaks. Make certain this procedure is carried out in a well
ventilated area and never in the presence of a flame, spark or heat source.
 Never use a dented or rusty LG tank.
GB, IE
3