Patton PATRON Serie Notice D'emploi page 109

108
CLEARANCE TO NON-COMBUSTIBLE
CONSTRUCTION
A minimum of 71/4 in./ 18,5 cm clearance from
the back of the grill to non-combustible
construction is required for the lid to open fully.
DO NOT INSTALL THIS UNIT INTO
COMBUSTIBLE ENCLOSURES!
MINIMUM CLEARANCE:
24 in./ 60,96 cm Clearance from all sides to
combustible material.
Always place the gas cylinder within reach
and in a well ventilated area, do not subject
gas cylinder to excessive heat.
BUILD-IN GRILL SPECIFICATIONS ALL MODELS
DESCRIPTION
Cut out width
Cut out depth
Cut out height
Non-combustible Island
surface
ISLAND CONSTRUCTION 740-0059 / 420-0063
Do not install this unit into combustible enclosures.
There should be a minimum clearance of at least
24 in.(60.96cm) from all sides to combustible
materials.
PLACEMENT OF THE GRILL
740-0059
4 BURNER
70,4cm / 7,72inch
46,6cm / 18,35inch
27,4cm / 10,8inch
X
BUILT-IN GRILL SPECIFICATIONS
WARNING
LOCATION
When determining a suitable location take into
account concerns such as exposure to wind,
proximity to traffic paths and keeping any gas supply
lines as short as possible. Locate the grill only in a
well-ventilated area. Always keep the hose in sight.
Never locate the grill in a building, garage,
breezeway, shed or other such enclosed areas.
During heavy use, the grill will produce a lot of
smoke.
For protection against bad weather: when the
BBQ is not in use, keep the unit covered with the
cover delivered with the BBQ.
PATRON
420-0063
TWO BURNER
70,4cm / 27,72inch 101,6cm / 40inch
46,6cm / 18,35inch 48,26cm / 19inch
27,4cm / 10,8inch 27,62cm / 10,8inch
X
A minimum of 7 1/4in.(18.5cm)
from the back of the grill is required
to non-combustible material.
108
MASTER
740-0549 740-0354A
4+ BURNER 3+ BURNER
106,68cm / 42inch
53,34cm / 21inch
36,2cm / 14,25inch
X
clearance
X