Rs232 Interface Setup - OHAUS PJX Serie Manuel D'instruction

EN-24
3. Press Yes to set the unit displayed to the weighing unit.

5.5 RS232 Interface Setup

Enter this sub-menu to customize RS232 standard settings. Data
may be output to either a printer or a PC.
5.5.1 Baud Rate
Set the baud rate (bits per second).
1200 = 1200 bps
2400 = 2400 bps
4800 = 4800 bps
9600 = 9600 bps
19200 = 19200 bps
38400 = 38400 bps
5.5.2 Transmission
Set the data bits, stop bit, and parity.
8-N-1 = 8 data bits, no parity, stop bit 1
8-N-2 = 8 data bits, no parity, stop bit 2
7-E-1 = 7 data bits, even parity, stop bit 1
7-E-2 = 7 data bits, even parity, stop bit 2
7-N-1 = 7 data bits, no parity, stop bit 1
7-N-2 = 7 data bits, no parity, stop bit 2
7-O-1 = 7 data bits, odd parity, stop bit 1
7-O-2 = 7 data bits, odd parity, stop bit 2
Parity
Parity
PJX Series Balance
rS232
bAud
8-N-1
8 data bits, stop bit 1