Techness RUN1000 Mode D'emploi page 44

Pull off the safety key, the LCD windows show"----", the buzzer sound "BIBI-BI", the sound
last 0.5second every 2second once and the treadmill will stop right now. The sound will
stop until put on the safety key. After putting on the safety key, the computer will show
2second, and all the data will be cleared.
2. PROGRAM KEY
Press the P key, program key: it will show:
P0 P-1 P-2
HRC FAT P24 .............
P0 is user's program, in this program, press"MODE" key, you can set three count-down
program: TIME COUNT DOWN mode; DISTANCE COUNT DOWN mode; CALORIES
COUNT DOWN mode.
Time30:00
3. Speed +/- key:
In the P1-P24 program, press Speed +/- key can adjust the time
4. BODY FAT FUNCTION
Press "PROG", choose "FAT" function, press" SPEED +/-" to adjust the item, press
"MODE" to choose the item.
After setting the item, the LCD show "FAT", put two hands on the handle pulse key on
the handle bar. After 3 seconds, it will show the result。
"01"shows the gender is male, "02"shows the gender is female
All manuals and user guides at all-guides.com
P-3 P-4 P-5
Distance1.00
44
P-6 P-7 P-8
P10 P-9
Calories50