Connecting With Cleaner - Hitachi CJ 120V Instructions De Sécurité Et Mode D'emploi

English

CONNECTING WITH CLEANER

By connecting with cleaner (sold separately)
through dust collector and adopter (sold
separately), most of dust can be collected.
(1) Remove the allen wrench from the base.
(2) Move the base fully forward. (Fig. 11, 12)
(3) Attach the chip cover with the shutter put
between the chip cover and gear cover. (Fig.
19)
(4) Connect the dust collector with adopter. (Fig.
20)
(5) Connect the adapter with the nose of cleaner.
(Fig. 20)
(6) Insert dust collector into the rear hole of the
base until the hook catches in the notch. (Fig.
21)
(7) Press the hook to remove the dust collector.
16
Chip cover
Fig. 19
Chip
cover
Base
Dust collector
Fig. 20
Notch
Hook
Base
Rear
hole Dust
collector Adapter
Fig. 21
Shutter
Adapter
Nose
Cleaner
Nose