Russell Hobbs RHIC202 Manuel D'instructions page 18

The maximum power
level for certain
cooking functions is
very low.
The fan works but the
appliance has not
started cooking.
ADVANCED STRUCTURAL AND TECHNICAL DESIGN FOR YOUR
SAFETY ASSURANCE
Error
Code
Inner Circuit
E0 and Malfunction
Protection
No Pot
E1 Protection
IGBT Overheat
E2
Protection
Over Voltage
E3
Protection
Under Voltage
E4
Protection
service centre.
The power levels set in place for the cooking functions have been
designed especially for a cooking task at hand. They are there for
your convenience and ease of use. Switch over to one of the
manual cooking functions for added flexibility when you need it.
You have to press a cooking function key within 1 minute after you
press the power ON / OFF key. If you do not press a cooking
function key within 1 minute, the appliance will switch off and the
fan will work for 1 minute to cool down the appliance.
Message
Should the inner circuit
malfunction, the LED display will
show error "E0" and a beep will
sound every second.
The induction cooker will check
the pot or pan from the time that a
cooking function is selected. In
the event of error "E1", a beep will
sound every 2 seconds. This will
occur if the pot or pan is
considered abnormal. The unit
will shut off after sounding the
alarm for a period of 30 seconds.
Should the IGBT (insulated gate
bipolar transistor) overheat (reach
a temperature above 150 ̊ C), the
unit will no longer produce any
heat.
Should the supply voltage
become abnormal, over 280V, the
induction cooker will stop heating
and a beep will sound every
second.
Should the supply voltage
become abnormal, under 140V,
18
What you should do
The beep will not stop until
you touch the "ON / OFF"
key. Visit your nearest
authorized service centre.
Place a suitable induction-
ready pot or pan on the
cooking area. If the pot or
pan is OK then the induction
cooker will return to a
functioning state within 30
seconds.
A beep will sound until you
have switched the unit off.
Check if the air outlet is
covered. If so, remove the
object covering the air outlet
and let the appliance cool
down.
Once the temperature
returns to a normal condition
then you can turn the power
on and the induction cooker
will function as normal.
Check if the voltage in your
home is suitable for the
induction cooker.
Once the voltage has
normalised, the LED display
and the induction cooker will