Russell Hobbs RHIC202 Manuel D'instructions page 10

OPERATING INSTRUCTIONS
1. Position the unit on a dry, firm, level surface, close to a power socket and out
of reach of children.
2. Plug the power cord into a suitable mains power socket.
The LED display will flash"-----" and the indicator light next to the "ON / OFF" key will
3.
also be flashing. Note that the unit is not yet switched on.
Touch the "ON / OFF" key to switch the appliance on. A beep will sound once and the
4.
LED display will show static lines "-----", no longer flashing. The indicator light next to
the "ON / OFF" key also remains on and is no longer flashing. The unit is now in
standby mode and the cooling fan of the appliance has turned on.
5. Place the induction-ready pot or pan onto the cooking area.
6. As per the recipe at hand, place the cooking ingredients into the cooking pot or pan.
7. If required, set the Preset (delay start) function now.
FUNCTION section. NOTE: the Preset function only works for the automatic cooking
functions.
8. Select one of the cooking function keys to start cooking. The induction cooker will
function normally when an induction-ready pot or pan has been placed on the cooking
surface.
NOTE: If no function key is pressed within one minute then the unit will automatically
turn off.
9. Next, adjust the power level as needed. Refer to the POWER SETTINGS section.
NOTE: the power level can only be adjusted when using the manual cooking
functions.
10. Now, adjust the required cooking time as necessary. Refer to the TIMER SETTING
section.
To switch the unit off, touch the "ON / OFF" key once.
11.
NOTE:

During the automatic cooking functions the LED display will show running lines in
clockwise direction.

To display the remaining time during the cooking process, simply touch the TIMER
key once.

You can switch to a different cooking function during cooking. If you want to select a
different cooking function then simply press the desired cooking function key. Note
that you will need to input any presets, power level and/or timer settings from scratch.

At the end of the cooking process the LED display will show "END" and a beep will
sound 5 times.
10
Refer to the PRESET