Power Settings - Russell Hobbs RHIC202 Manuel D'instructions


To adjust, touch the circular keys. Touch key (1)
finger to key (2)
increase the setting continuously. Similarly, move your finger counter-clockwise to
decrease the setting.

Touch the TIMER key again to adjust the minute indicator on the LED display. The
minute indicator will flash on and off indicating that it can now be adjusted.

Once you are happy with your TIMER selection, do not press any keys for a few
seconds and the appliance will automatically confirm the selection for you.

The timer will start to countdown.

After the countdown time has reached "0" a beep will sound 5 times and the unit will
switch off.

You may touch the "ON / OFF" key to switch the unit on again and touch another
function key to continue cooking.
NOTES:

If you continue to press the circular keys in an attempt to adjust the timer past the
maximum timer setting of 9 hours and 59 minutes, then the unit will start from the
beginning and switch to the minimum timer setting of 10 minutes. The same applies
to the minimum timer setting. After reaching the minimum timer setting of 10 minutes
then the unit will switch to the maximum timer setting of 9 hours and 59 minutes)

You cannot use the TIMER function as a kitchen clock, as you would do on the LED
display of an oven or microwave. The purpose of this TIMER function is only to set
the amount of cooking time required

POWER SETTINGS

The power level, wattage and temperature settings are corresponding and cannot be set
individually. These settings can however be adjusted from power level 1 to 18 by touching
the circular keys. The following table shows the change of power level, corresponding
wattage and the corresponding temperatures by each touch of the circular keys as they will
be shown on the LED display.
to increase the time by 1 hour. Continue to glide your finger to
12
with one finger and glide the