Simmer Function; Steam Function - Russell Hobbs RHIC202 Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

NOTE: The power level/ heat intensity cannot be adjusted when using this function.
The pot or pan will automatically be heated at power level 10 or 1200W. Here, the
LED display will show running lines in clockwise direction.
Touch the TIMER key once. The LED display shows "2 00" and will start to
countdown the time until "0" is reached. The timer can be adjusted from 1 hour up to
3 hours and 59 minutes. When "0" is reached the LED display will show "END".
Once the timer has reached "0" then the LED display will show "END" and the unit
will automatically switch to keeping the food warm ensuring that the food stays at an
optimal serving temperature. It will do so for 2 hours at 60°C/ 100W. Note that the
temperature cannot be adjusted in this state. After 2 hours, the unit will automatically
turn off and the cooling fan will stop one minute thereafter.
To stop the automatic keep warm function, simply touch the "ON / OFF" key once.

SIMMER FUNCTION

Touch the SIMMER key once. The indicator light next to the SIMMER key will switch
on and the automatic simmer function will start.
NOTE: The power level/ heat intensity cannot be adjusted when using this function.
The pot or pan will automatically be heated at power level 10 / 1200W. Here, the LED
display will show running lines in clockwise direction.
Touch the TIMER key once. The LED display will show "1 00" and will start to
countdown the time until "0" is reached. The timer can be adjusted from 30 minutes
up to 3 hours and 59 minutes.
Once the timer has reached "0" then the LED display will show "END" and the unit
will automatically switch to keeping the food warm ensuring that the food stays at an
optimal serving temperature. It will do so for 1 hours at 60°C / 100W. Note that the
temperature cannot be adjusted in this state. After 2 hours, the unit will automatically
turn off and the cooling fan will stop one minute thereafter.
To stop the automatic keep warm function, simply touch the "ON / OFF" key once.

STEAM FUNCTION

Touch the STEAM key once. The indicator light next to the STEAM key will switch
on and the automatic steaming function will start.
NOTE: The power level / heat intensity cannot be adjusted when using this function.
The pot or pan will automatically be heated at power level 17 / 2000W.
Here the LED display will show "0 25" and will start to countdown the time until "0" is
reached. The timer can be adjusted from 10 minutes up to 3 hours and 59 minutes.
14

Publicité

Table des Matières
loading

Table des Matières